Parts by Type

print This page

End Yokes

Filters: DIFF MODEL = , VEHICLE CLASS = LD,
PART NUMBER SERIES SPLINE COUNT SPLINE DIA. HUB DIA. THRU HOLE C/L TO END STYLE NOTES VEHICLE CLASS BRAND
3-4-84-1 1350 1 1.496 2.250 2.000 3.500 BS U-BOLT 3-94-18X or STRAP 3-70-28X, keyway 0.375, tapered hole LD Spicer
2-4-1921 1310 10 1.178 1.438 2.469 SR No machined hub, but OD is 1.800" LD Spicer
2-4-411 1310 10 1.375 1.719 1.500 2.938 UB LD Spicer
2-4-2371 1310 10 1.375 2.000 2.000 3.438 UB LD Spicer
2-4-6011 1310 10 1.375 2.125 1.375 2.938 UB LD Spicer
2-4-7151 1310 10 1.375 2.125 1.375 2.938 UB LD Spicer
2-4-7181-1 1310 10 1.500 2.125 1.734 3.500 BS LD Spicer
3-4-2111-1 1350 10 1.125 1.552 1.500 3.000 BS LD Spicer
3-4-11711-1 1350 10 1.375 1.703 1.375 2.922 BS LD Spicer
3-4-1261-1 1350 10 1.375 1.719 2.000 3.500 BS LD Spicer
3-4-3291-1 1350 10 1.375 2.125 2.000 3.688 BS LD Spicer
3-4-1111-1 1350 10 1.375 1.750 1.812 3.312 BS LD Spicer
3-4-3951-1 1350 10 1.375 2.125 2.000 3.500 BS LD Spicer
3-4-13881-1 1350 10 1.500 2.156 2.000 3.695 BS LD Spicer
3-4-8511-1 1350 10 1.500 2.156 2.000 3.766 BS LD Spicer
3-4-1501-1 1350 10 1.500 2.250 2.063 3.530 BS LD Spicer
3-4-1441-1 1350 10 1.500 2.250 2.000 3.500 BS LD Spicer
3-4-3801-1 1350 10 1.750 2.375 1.812 3.500 BS LD Spicer
3-4-2351-1 1350 10 1.750 2.375 2.188 4.000 BS LD Spicer
3-4-1481-1 1410 10 1.375 1.938 2.000 3.688 BS LD Spicer
3-4-3941-1 1410 10 1.375 2.125 1.750 3.500 BS LD Spicer
3-4-7141 1410 10 1.375 2.500 1.938 5.750 BS LD Spicer
3-4-6561-1 1410 10 1.500 1.812 2.000 3.719 BS LD Spicer
3-4-1901-1 1410 10 1.500 2.125 2.000 3.688 BS LD Spicer
3-4-2241-1 1410 10 1.500 2.250 2.188 3.875 BS LD Spicer
3-4-2261-1 1410 10 1.500 2.312 2.000 3.688 BS LD Spicer
3-4-2941-1 1410 10 1.500 2.313 2.000 3.688 BS LD Spicer
3-4-10551-1 1410 10 1.500 2.625 2.000 3.844 BS LD Spicer
3-4-11761-1 1410 10 1.750 2.359 2.094 4.203 BS LD Spicer
3-4-1841-1 1410 10 1.750 2.375 2.188 4.188 BS LD Spicer
3-4-7031-1 1410 10 1.750 2.625 2.188 4.250 BS LD Spicer
3-4-2511-1 1410 10 1.750 2.625 2.188 4.250 BS LD Spicer
2-4-2611-1X 1310 10 1.250 1.875 1.500 2.938 BS LD Spicer
2-4-2611X 1310 10 1.250 1.875 1.500 2.938 UB LD Spicer
2-4-2801-1X 1310 10 1.125 1.552 1.500 3.000 BS Slinger 31875 LD Spicer
N2-4-4061X 1310 10 1.125 1.552 1.500 3.000 CV Common TC yoke for early 10 spline applications. Counterbore 0.311", Slinger 330699 LD Neapco
3-4-4421-1X 1480 10 1.500 1.938 2.000 4.031 BS Coupling shaft yoke LD Spicer
3-4-5791-1X 1480 10 1.750 2.625 2.250 4.281 BS .250 deep spline chamfer LD Spicer
3-4-5811-1X 1480 10 1.750 2.625 2.188 4.281 BS .250 deep spline chamfer LD Spicer
3-4-5821-1X 1480 10 1.969 2.625 2.250 4.406 BS LD Spicer
3-4-1211-1 1350 10 1.375 2.000 2.000 3.500 BS LD Spicer
3-4-2271-1 1410 10 1.375 2.125 2.000 3.685 BS LD Spicer
3-4-6701-1 1480 10 1.375 2.125 2.000 4.031 BS LD Spicer
3-4-3961-1 1410 10 1.500 2.125 2.000 3.688 BS LD Spicer
3-4-3111-1 1480 10 1.500 2.125 2.000 4.219 BS LD Spicer
3-4-3491-1 1410 10 1.625 2.375 2.125 3.938 BS LD Spicer
3-4-7361-1 1480 10 1.750 2.250 2.188 4.406 BS Active LD Spicer
3-4-3571-1 1480 10 1.750 2.375 2.188 4.219 BS LD Spicer
3-4-3191-1 1480 10 1.750 2.375 2.188 4.219 BS LD Spicer
3-4-11561-1 1480 10 1.750 2.500 1.922 5.109 BS Flanged end yoke, strap kit not furnished by Dana LD Spicer
3-4-13901-1 1480 10 1.750 2.500 2.000 4.000 BS LD Spicer
3-4-13911-1 1410 10 1.750 2.501 2.000 4.000 BS LD Spicer
3-4-10301-1 1480 10 1.750 2.625 2.188 4.750 BS Flanged yoke w/.250 deep spline chamfer LD Spicer
3-4-3121-1 1480 10 1.750 2.625 2.250 4.469 BS LD Spicer
3-4-2251-1 1410 10 1.972 2.594 1.844 3.969 BS LD Spicer
3-4-5441-1 1480 10 1.972 2.594 1.859 4.500 BS LD Spicer
8-4-1061 1820 10 2.500 3.500 3.234 4.375 WB LD Spicer
2-4-4021X 1310 10 1.250 1.750 2.000 3.375 CV LD Spicer
3-4-178-1X 1350 10 1.375 1.719 1.781 3.281 BS LD Spicer
3-4-2851-1X 1410 10 1.375 1.719 1.781 3.469 BS LD Spicer
3-4-4451-1X 1410 10 1.250 1.875 1.500 3.188 BS LD Spicer
3-4-5881-1X 1410 10 1.750 2.625 2.188 4.000 BS LD Spicer
3-4-5921-1X 1410 10 1.625 2.375 2.125 4.188 BS LD Spicer
3-4-6631-1X 1410 10 1.500 1.812 2.000 3.719 BS LD Spicer
3-4-1471-1 1410 10 1.375 1.719 2.000 3.703 BS LD Spicer
3-4-3541-1 1480 10 1.750 2.625 2.250 4.281 BS Active LD Spicer
3-4-9621-1 1480 10 1.750 2.750 2.250 4.281 BS LD Spicer
3304-10 1330 10 1.375 1.750 1.750 3.188 UB Same as 2-4-4071,
U-bolt type		 LD PTI
3504-101 1350 10 1.375 1.750 1.500 3.188 UB LD PTI
N2-4-2791 1310 10 1.125 1.552 1.500 3.000 UB LD Neapco
2-4-1721-1 1310 10 0.982 1.562 1.938 3.656 BS LD Spicer
2-4-3701-1 1310 10 1.188 1.562 1.500 3.000 BS LD Spicer
2-4-2901-1 1310 10 1.250 2.000 1.750 3.281 BS LD Spicer
2-4-7061 1310 10 1.250 2.000 1.750 3.281 UB LD Spicer
2-4-2671-1 1310 10 1.375 1.750 1.500 3.219 BS LD Spicer
3-4-2801 1350 10 1.170 1.375 1.406 2.406 UB LD Spicer
3-4-3761-1 1350 10 1.250 1.750 2.000 3.500 BS LD Spicer
3-4-2231-1 1350 10 1.500 2.253 2.185 3.905 BS LD Spicer
3-4-7321-1X 1410 10 1.500 2.312 2.000 3.688 BS LD Spicer
3-4-12201-1 1410 10 1.625 2.370 2.130 3.938 BS LD Spicer
3-4-2391-1 1410 10 1.960 2.625 2.062 4.125 BS LD Spicer
3-4-2161-1 1410 10 1.972 2.594 1.844 3.688 BS LD Spicer
3-4-3231-1 1480 10 1.375 2.125 1.750 3.965 BS LD Spicer
3-4-13021 1480 10 1.375 2.125 2.000 3.859 SR LD Spicer
3-4-13921-1 1480 10 1.500 1.810 2.000 4.031 BS used on Superduties mid section by the CB LD Spicer
3-4-6221-1X 1480 10 1.500 2.250 2.188 4.200 BS LD Spicer
3-4-3691-1 1480 10 1.500 2.500 2.000 4.031 BS LD Spicer
3-4-13821-1 1480 10 1.750 2.362 2.120 4.215 BS LD Spicer
3-4-3051-1 1480 10 1.972 2.598 1.859 4.525 BS LD Spicer
4-4-4211-1 1550 10 1.500 2.563 2.000 3.812 BS Coupling shaft yoke LD Spicer
4-4-4211-2 1550 10 1.500 2.563 2.000 3.812 BS Coupling shaft yoke. Attaching hdwr by OEM LD Spicer
4-4-1921-1 1550 10 1.625 2.375 2.125 3.938 BS LD Spicer
4-4-2041-1 1550 10 1.750 2.375 2.188 4.000 BS LD Spicer
4-4-6791-2 1550 10 1.750 2.500 1.915 4.115 BS Attaching hardware by OEM LD Spicer
4-4-4781-2 1550 10 1.750 2.500 1.938 4.125 BS Attaching hardware by OEM LD Spicer
4-4-4781-1 1550 10 1.750 2.500 1.938 4.125 BS LD Spicer
4-4-7861-1X 1550 10 1.750 2.500 2.000 5.750 BS Flanged end yoke. LD Spicer
4-4-2511-1 1550 10 1.750 2.500 2.250 4.188 BS LD Spicer
4-4-3581-1X 1550 10 1.750 2.625 2.234 4.672 BS .250 deep spline chamfer LD Spicer
4-4-2091-1 1550 10 1.750 2.625 2.250 4.281 BS LD Spicer
4-4-3811-1 1550 10 1.750 2.750 2.245 4.652 BS LD Spicer
4-4-1931-1 1550 10 1.750 2.625 2.250 4.281 BS LD Spicer
4-4-4071-1X 1550 10 1.962 2.625 2.266 4.266 BS LD Spicer
4-4-5061-1 1550 10 1.962 2.938 2.530 4.585 BS LD Spicer
4-4-7201-1 1550 10 1.964 2.750 1.891 4.312 BS LD Spicer
4-4-2401-1 1550 10 2.000 2.625 2.125 4.203 BS LD Spicer
4-4-6211-1 1550 10 2.000 2.625 2.250 4.281 BS LD Spicer
4-4-2451-1 1550 10 2.000 2.484 2.453 4.500 BS LD Spicer
4-4-3931-2 1550 10 2.250 3.000 3.000 5.047 BS Attaching hardware by OEM LD Spicer
4-4-3501-1 1550 10 2.250 3.500 3.000 5.125 BS LD Spicer
2-4-1731-1 1310 10 1.375 2.125 2.000 3.438 BS LD Spicer
N2-4-2671 1310 10 1.375 1.750 1.750 3.220 UB 20 DEGREES JOINT ANGLE LD Neapco
N3-4-2171-1 1350 10 1.375 1.720 1.780 3.280 BS LD Neapco
N3-4-6561-1 1410 10 1.500 1.812 2.000 3.719 BS COUPLING SHAFT STYLE LD Neapco
3104-1921 1310 10 1.178 1.438 2.469 SR No machined hub, but OD is 1.800" LD PTI
4-4-2051-1 1550 10 1.500 2.313 2.000 3.775 BS Coupling shaft yoke LD Spicer
4-4-2941 1550 10 2.000 2.750 3.000 5.063 UB LD Spicer
3-4-6901-1 1480 10 1.500 1.810 2.000 4.000 BS uses 3-70-38X strap kit LD Spicer
1-4-1201 1100 13 0.878 2.000 1.250 2.250 SR LD Spicer
2-4-3331 1310 13 0.878 2.000 1.567 2.562 SR LD Spicer
3-4-7001-1 1480 13 1.755 2.500 2.250 4.281 BS LD Spicer
4-4-2931-1 1550 13 1.755 2.375 2.250 4.031 BS LD Spicer
2-4-5411 1310 14 1.268 2.000 2.500 3.688 SR .375 Dia.set screw @ 6 OR 12, hub diameter not ground LD Spicer
2-4-1741 1310 14 1.268 2.120 1.500 2.562 SR LD Spicer
2-4-7141-1 1310 14 1.268 2.125 1.953 3.453 BS LD Spicer
3-4-13161 1350 14 1.268 0.000 0.000 2.688 SR LD Spicer
3-4-7401 1350 14 1.284 2.000 2.688 2.688 SR LD Spicer
3-4-8501-1 1350 14 1.511 2.125 2.531 4.500 BS LD Spicer
3-4-5321 1410 14 1.268 1.516 1.750 2.750 SR LD Spicer
3-4-7721-1 1410 14 1.268 2.375 2.250 4.031 BS LD Spicer
3-4-8071-1 1410 14 1.878 2.564 2.015 4.219 BS Active LD Spicer
6C-4-141 6C 14 1.922 2.375 2.183 3.500 WB Tapped holes in yoke ears LD Spicer
3-4-7571-1 1480 14 1.922 2.375 2.188 4.438 BS LD Spicer
3-4-11071-1 1480 14 1.922 2.375 2.188 4.438 BS LD Spicer
3-4-5391X 1350 14 1.284 2.000 1.438 2.688 SR LD Spicer
3-4-9561-1X 1410 14 1.268 2.250 2.125 4.031 BS LD Spicer
4-4-4811-1 1550 14 1.922 2.375 2.203 4.641 BS LD Spicer
2-4-4931 1310 15 1.010 1.594 2.656 3.562 SR LD Spicer
2-4-4921 1310 15 1.010 2.000 1.062 2.312 SR LD Spicer
2-4-8241 1310 15 1.010 2.120 1.470 2.500 SR LD Spicer
3-4-11421-1 1350 15 1.282 1.810 1.450 3.030 BS Active LD Spicer
3-4-11441-1 1350 15 1.282 1.812 1.600 3.031 BS Active LD Spicer
3-4-7311-1 1410 15 1.605 2.125 1.938 3.750 BS LD Spicer
5C-4-51 5C 15 1.605 2.123 1.932 2.820 WB Tapped holes in yoke ears LD Spicer
6C-4-71 6C 15 1.605 2.125 1.937 3.090 WB LD Spicer
3-4-9301-1 1480 15 1.605 2.125 1.938 4.000 BS LD Spicer
3-4-13601-1 1350 15 1.282 1.970 2.250 3.875 BS LD Spicer
4-4-5601-1 1550 15 1.605 2.125 1.938 4.000 BS LD Spicer
4-4-6331-1 1550 15 1.605 2.125 1.953 4.000 BS LD Spicer
4-4-4421-1 1550 15 2.005 2.875 2.680 4.655 BS LD Spicer
NOE-04-5695-A 1000 15 1.026 1.630 0.000 2.500 ISR LD Neapco
6C-4-91 6C 16 1.650 2.375 2.000 3.062 WB Tapped holes in yoke ears LD Spicer
8-4-851 1820 16 2.344 2.875 2.750 4.125 WB LD Spicer
4-4-4361-1 1550 16 2.125 3.000 3.047 5.094 BS LD Spicer
6C-4-261 6C 17 2.289 2.750 2.500 4.030 WB Flanged yoke w/8 tapped holes in flange LD Spicer
2-4-6301 1310 18 1.215 2.120 1.500 2.562 SR LD Spicer
2-4-6341 1310 19 1.274 2.000 1.344 2.500 SR LD Spicer
2-4-5781 1310 21 1.375 2.125 1.469 2.562 SR LD Spicer
2-4-5091 1310 21 1.403 1.875 1.562 3.000 CV LD Spicer
2-4-6221 1330 21 1.403 1.906 1.719 3.594 CV LD Spicer
3-4-10591-1 1350 21 1.403 2.000 1.234 2.953 BS LD Spicer
3-4-11471-1 1410 21 1.383 2.625 3.312 4.641 BS LD Spicer
3-4-14461-1 1350 21 1.403 1.938 2.045 3.835 BS LD Spicer
3-4-13011-1X 1350 21 1.403 1.938 1.938 3.844 BS LD Spicer
2-4-7801-1 1310 21 1.383 2.250 1.650 3.115 BS LD Spicer
NOE-04-2181-A 1000 21/22 0.984 1.430 1.570 4.000 ISR PIN HOLE DISTANCE TO END OF HUB (in): 1.57
PIN HOLE SIZE (in): .232-.238 One side only		 LD Neapco
NOE-04-2135-A 1000 22 0.984 1.500 0.380 2.105 ISR PIN HOLE DISTANCE TO END OF HUB (in): .380-.400
PIN HOLE SIZE (in): .312-.318 Thru		 LD Neapco
NOE-04-2179-A 1000 22 0.984 1.430 1.570 4.000 ISR PIN HOLE DISTANCE TO END OF HUB (in): 1.57
PIN HOLE SIZE (in): .232-.238 One side only		 LD Neapco
NOE-04-2141-A 1000 22 0.984 1.430 0.500 4.000 ISR PIN HOLE DISTANCE TO END OF HUB (in): 0.5
PIN HOLE SIZE (in): .232-.238 One side only		 LD Neapco
NOE-04-2183-A 1000 22 0.984 1.430 0.690 3.440 ISR PIN HOLE DISTANCE TO END OF HUB (in): 0.69
PIN HOLE SIZE (in): .232-.238 One side only		 LD Neapco
NOE-04-2192-A 1000 22 0.984 1.430 0.500 3.300 ISR PIN HOLE DISTANCE TO END OF HUB (in): 0.5
PIN HOLE SIZE (in): .232-.238 One side only		 LD Neapco
NOE-04-2190-A 1000 22 0.984 1.430 0.690 3.220 ISR PIN HOLE DISTANCE TO END OF HUB (in): 0.69
PIN HOLE SIZE (in): .232-.238 One side only		 LD Neapco
NOE-04-2185-A 1000 22 0.984 1.430 0.690 3.650 ISR PIN HOLE DISTANCE TO END OF HUB (in): 0.69
PIN HOLE SIZE (in): .232-.238 One side only		 LD Neapco
NOE-04-2144-A 1000 22 0.984 1.630 0.050 2.500 ISR PIN HOLE DISTANCE TO END OF HUB (in): 0.5
PIN HOLE SIZE (in): .312-.318 Thru		 LD Neapco
NOE-04-2654-A 1000 22 0.984 1.500 0.000 1.940 ISR LD Neapco
NOE-04-3871-A 1000 22 0.984 1.380 2.110 ISR PIN HOLE DISTANCE TO END OF HUB (in): .38-.40
PIN HOLE SIZE (in): .314-.318 Thru
 LD Neapco
NOE-04-3872-A 1000 22 0.984 1.380 0.500 3.300 ISR PIN HOLE DISTANCE TO END OF HUB (in): 0.5
PIN HOLE SIZE (in): .232-.238		 LD Neapco
NOE-04-6032-A 1000 22 0.984 1.500 1.500 4.000 ISR PIN HOLE DISTANCE TO END OF HUB (in): 1.57
PIN HOLE SIZE (in): .232-.238		 LD Neapco
NOE-02-2125-A 1000 22 0.984 1.300 3.000 ISR SPLINE YOKE W/FLANGE
PILOT N/A
BOLT CIRCLE 2.500
M8 x 1.25 THRU
F-CL 2.400		 LD Neapco
NOE-02-2171-A 1000 22 0.984 1.600 2.500 ISR SPLINE YOKE W/FLANGE
PILOT 3.000
BOLT CIRCLE 3.375
5/16-18
F-CL 1.000		 LD Neapco
1404-22 1100 22/23 0.990 1.420 1.360 2.750 SR Use with 1453-232 or 3053-233 midship stub LD PTI
1404-231 1100 22/23 0.990 1.420 1.800 3.250 SR Use with 1453-232 or 3053-233 midship stub LD PTI
3004-231 1300 22/23 0.990 1.420 1.800 3.250 SR Use with 1453-232 or 3053-233 midship stub LD PTI
3-4-11751-1X 1410 22/23 1.527 1.889 2.678 4.425 BS Counterbore .080", Proprietary to Caterpillar LD Spicer
1204-241 1251 22/24 0.995 1.342 1.300 2.900 ISR Used on 2 piece Subaru shafts to replace the center CV section, ujoint part # 1251-22 LD PTI
3-4-10941-1 1410 23 1.260 1.565 1.609 3.562 BS LD Spicer
3-4-11811-1 1410 23 1.506 2.375 1.406 3.500 BS LD Spicer
3-4-14031-1 1480 23 1.506 2.375 1.403 3.500 BS LD Spicer
2-4-5921-1X 1210 23 1.031 1.562 1.500 3.063 BS LD Spicer
3104-231 1310 23 1.260 1.562 1.625 3.062 BS Counterbore at hub end, Same as Dana 2-4-4441-1 LD PTI
3-4-11701-1X 1410 24 1.588 2.250 2.125 4.000 BS LD Spicer
N2-4-JK02 1310 24 1.250 1.876 1.500 3.000 UB Used at differential end on 07+ Jeep JK. LD Neapco
N3-4-JK04 1350 24 1.250 1.876 1.500 3.000 UB Used at differential end on 07+ Jeep JK. LD Neapco
3104-242 1310 24 1.250 1.876 1.500 3.000 UB Used at differential end on 07+ Jeep JK. LD PTI
3504-243 1350 24 1.250 1.876 1.500 3.000 UB Used at differential end on 07+ Jeep JK. LD PTI
N2-4-JK06 1310 24 1.250 1.850 1.500 3.000 UB Jeep JK Conversion - Pinion Front LD Neapco
1204-261 1251 24/26 1.115 1.445 1.300 3.312 ISR Used on 2 piece Subaru shafts to replace the center CVJ, 1.73" inside ear to ear LD PTI
2304-261 2351 24/26 1.115 1.445 1.300 3.312 ISR Used on 2 piece Toyota shafts with 2351-20 Ujoint. Used with 1253-261 stub. 1.84" inside ear to ear LD PTI
2-4-5901-1 1210 26 1.146 1.625 1.156 2.750 BS LD Spicer
2-4-7021-1 1310 26 1.146 1.500 1.469 3.000 BS LD Spicer
2-4-6561-1 1310 26 1.146 1.552 1.495 2.995 BS LD Spicer
2-4-4341 1310 26 1.146 1.552 1.500 3.000 CV LD Spicer
2-4-6781-1 1310 26 1.146 1.552 1.500 3.000 BS LD Spicer
2-4-6641-1 1310 26 1.146 1.552 1.500 3.000 BS LD Spicer
2-4-2271-1 1310 26 1.146 1.562 1.500 3.000 BS LD Spicer
2-4-8311-1 1310 26 1.146 1.844 1.370 3.235 BS Proprietary to Chrysler LD Spicer
3-4-13761-1 1350 26 1.146 1.550 1.500 3.000 BS LD Spicer
2-4-6111X 1330F 26 1.146 1.562 1.500 3.000 UB LD Spicer
2-4-7291-1X 1310 26 1.146 1.484 1.484 3.000 BS LD Spicer
2-4-7501-1X 1310 26 1.146 1.469 1.484 3.500 BS LD Spicer
2-4-8091X 1310 26 1.146 1.552 1.500 3.000 UB LD Spicer
3104-26CV 1310 26 1.146 1.552 1.500 3.000 CV LD PTI
3304-262 1330 26 1.146 1.492 1.973 3.465 SR Toyota Mid-Ship Yoke snap ring style LD PTI
2-4-6411-1X 1310 26 1.146 1.453 1.500 3.000 BS LD Spicer
2-4-8701-1X 1310 26 1.146 1.500 1.465 3.000 BS LD Spicer
2-4-8541-1X 1310 26 1.146 1.500 1.736 3.270 BS LD Spicer
2-4-2461-1X 1310 26 1.146 1.552 1.500 3.000 BS LD Spicer
3104-263 1310 26 1.146 1.500 1.469 3.000 BS Same as Dana 2-4-7021-1 LD PTI
5C-4-91 5C 27 1.450 2.250 2.060 3.375 WB Flanged WB yoke w/tapped holes in yoke ears LD Spicer
3-4-11181-1 1480 27 1.751 2.500 2.063 4.125 BS LD Spicer
2-4-03952X 1330 27 1.118 1.970 1.785 3.772 BS Counterbore 0.276", Slinger 5003953 LD Spicer
3-4-14881-1XM 1410 27 1.751 2.750 2.701 4.565 BS LD Spicer
3-4-12451-1x 1480 27 1.751 2.750 2.703 4.565 BS LD Spicer
4-4-6141-1 1550 27 1.751 2.500 2.094 4.125 BS LD Spicer
4-4-5991-1 1550 27 1.751 2.750 2.400 4.250 BS .250 deep spline chamfer LD Spicer
3304-281 1330F 28 1.218 1.500 2.850 4.750 UB Fits T18,T19,T98 manual transmissions LD PTI
2-4-7031-1X 1330 28 1.229 1.844 1.375 2.938 BS LD Spicer
2-4-6161-1 1310 28 1.229 1.844 1.375 2.938 BS LD Spicer
3-4-10351-1X 1480 28 1.875 2.625 3.000 4.875 BS Slinger 3-68-154 LD Spicer
N2-4-FD02X 1330F 28 1.235 1.810 2.420 4.030 UB Joint Angle 25 degrees LD Neapco
N2-4-FD01X 1310 28 1.235 1.810 2.420 4.030 UB Joint Angle 25 degrees LD Neapco
2-4-8421-1 1330 29 1.276 1.875 1.700 3.188 BS LD Spicer
3-4-11721-1 1350 29 0.970 1.500 1.500 3.547 BS LD Spicer
3-4-14621-1 1350 29 1.276 1.810 1.495 2.995 BS LD Spicer
3-4-12211-1 1350 29 1.276 1.875 1.500 3.000 BS Active LD Spicer
4104-291 1410 29 1.276 1.710 1.500 3.200 BS LD PTI
3-4-12461-1 1350 29 1.498 1.969 2.837 4.984 BS LD Spicer
2-4-3801X 1310 29 1.276 1.875 1.500 2.938 UB LD Spicer
3-4-13391-1X 1480 29 1.276 1.875 1.500 3.500 BS LD Spicer
3-4-8731-1 1410 29 1.276 1.875 1.500 3.188 BS LD Spicer
2-4-3781X 1310 29 1.276 1.875 1.500 2.531 UB LD Spicer
2-4-4291-1X 1330 29 1.276 1.875 1.500 2.938 BS Slinger 34592 LD Spicer
2-4-8391-1X 1310 29 1.276 1.875 1.500 2.996 BS LD Spicer
3-4-11891-1X 1410 29 1.276 1.874 1.420 3.185 BS LD Spicer
3-4-14531-1 1350 29 1.276 1.875 1.500 3.000 BS Proprietary to Ford LD Spicer
3-4-13031-2X 1350 29 1.276 1.875 1.500 3.000 BS LD Spicer
3-4-14711-1X 1410 29 1.276 1.875 1.500 3.200 BS LD Spicer
3304-291 1330 29 1.276 1.750 1.500 3.188 BS Mates with stub 3153-291 and 3153-292 (use 16-74-101 nut)
 LD PTI
3504-291 1350 29 1.276 1.710 1.500 3.188 BS Mates with stub 3153-291 and 3153-292
(use 16-74-101 nut)		 LD PTI
2-4-03950X 1330 29 1.200 1.653 1.799 3.772 BS Counterbore 0.335", Slinger 5003951 LD Spicer
2-4-03954-1X 1330 29 1.200 1.653 1.799 3.772 BS Counterbore 0.335", Slinger 5003955 LD Spicer
2-4-7921 1330 29 1.276 0.000 1.500 3.094 UB Coupling yoke LD Spicer
3-4-5721-1 1350 29 1.276 1.875 1.500 3.000 BS LD Spicer
3-4-8691-1X 1350 30 1.312 1.940 1.156 3.125 BS LD Spicer
4-4-6191-1 1550 30 1.939 2.752 2.063 4.125 BS LD Spicer
N2-4-GM01X 1310 30 1.328 1.740 1.190 2.590 UB LD Neapco
N2-4-GM02X 1330 30 1.328 1.740 1.190 2.700 UB LD Neapco
N2-4-GM03X 1310 30 1.312 1.940 1.150 3.160 UB LD Neapco
N3-4-0880-1X 1350 30 1.312 1.940 1.150 3.190 BS LD Neapco
4-4-5941-1X 1550 31 2.008 2.625 2.297 4.165 BS Counterbore 0.380" LD Spicer
4-4-5091-1 1550 31 2.008 3.000 2.766 4.938 BS LD Spicer
4104-31 1410 31 1.380 1.890 2.000 3.700 UB Counter Bore .21
Borg Warner TC 1356		 LD PTI
3504-31 1350 31 1.380 1.890 2.000 3.540 UB Counter Bore .21
Borg Warner TC 1356		 LD PTI
3-4-13731-1 1350 31/32 1.380 1.875 4.094 5.594 BS LD Spicer
3503-324 1350 31/32 1.380 1.885 4.094 5.594 BS Replaces 3-4-13211-1 which was a bolt-on. This part has a welch plug that can be removed to make it a bolt on. Use with strap kit 3570-20. LD PTI
2-4-4191-1 1310 32 1.401 2.125 2.000 3.438 BS Replaces 2-4-4191 u-bolt style LD Spicer
2-4-5441 1330 32 1.401 1.875 2.000 3.875 CV Discontinued by Dana 04/2018 LD Spicer
3-4-6211-1 1350 32 1.401 2.125 2.000 3.500 BS NP203, NP205, NP208, NP241 LD Spicer
3-4-7241-1 1350 32 1.401 2.125 2.719 4.750 BS LD Spicer
3-4-13511-1 1410 32 1.380 1.886 2.000 3.675 BS LD Spicer
3-4-10951-1 1410 32 1.401 2.125 2.000 3.688 BS NP 203 and NP 205 LD Spicer
3-4-13351-1X 1480 32 2.114 3.000 2.250 4.281 BS LD Spicer
2604-32 7260 32 1.401 2.125 2.000 3.625 BS Fits 203/205 transfer case LD PTI
3104-321CV 1310 32 1.401 1.943 2.000 3.875 CV CV conversion yoke for 07 and up Jeep JK on front or rear output,
Splines counterbored top and bottom,
Includes hub sleeve		 LD PTI
3104-322CV 1310 32 1.401 1.943 2.000 3.875 CV 03-06 Jeep Rubicon with 241 transfer case LD PTI
2-4-5141-1 1310 32 1.401 2.000 2.000 3.438 BS LD Spicer
4-4-7251-1X 1550 32 2.070 2.875 2.781 2.875 BS LD Spicer
4-4-7001-1X 1550 32 2.114 3.000 2.250 4.312 BS LD Spicer
N2-4-JK01 1310 32 1.401 1.943 2.000 3.443 UB Used at transfer case on 07+ Jeep JK. Front and rear non-CV 1310 yoke.
LD Neapco
N2-4-5341 1310 32 1.401 1.880 2.000 3.880 CV Joint Angle 13 degrees LD Neapco
3-4-10461-1X 1410 34 1.790 2.625 2.188 4.031 BS LD Spicer
3-4-10471-1X 1480 34 1.790 2.625 2.188 4.281 BS LD Spicer
3-4-7261-1X 1480 34 1.790 2.562 2.750 5.562 BS Flanged end yoke, strap kit not furnished by Dana LD Spicer
3-4-8051-1X 1480 34 1.774 2.500 2.250 4.469 BS LD Spicer
3-4-10261-1 1480 34 1.790 2.625 2.188 4.281 BS LD Spicer
3-4-8061-1X 1410 34 1.774 2.500 2.250 4.188 BS LD Spicer
3-4-13971-1X 1410 34 1.790 2.565 2.750 5.125 BS Proprietary to GM LD Spicer
3-4-13931-1 1480 34 1.790 2.625 2.188 4.281 BS LD Spicer
4-4-4111-1X 1550 34 1.774 2.500 2.260 4.700 BS LD Spicer
4-4-6961-1X 1550 34 1.790 2.375 2.200 4.000 BS LD Spicer
4-4-4801-1X 1550 34 1.790 2.562 2.750 5.156 BS LD Spicer
4-4-4801-2X 1550 34 1.790 2.562 2.750 5.156 BS Attaching hardware by OEM LD Spicer
4-4-3861-1X 1550 34 1.790 2.562 2.790 5.125 BS LD Spicer
4-4-04238-1X 1550 34 1.790 2.565 2.760 5.525 BS LD Spicer
4-4-5611-1X 1550 34 1.790 2.625 2.185 4.275 BS LD Spicer
55-4-01480-1X 1480 34 1.790 2.564 2.760 4.870 BS Replaced 5001480 LD Spicer
55-4-101-1X 1480 34 1.790 2.564 2.760 4.870 BS For 9 x 3" Brake" - Active LD Spicer
55-4-41-1X 1480 34 1.790 2.375 2.188 4.219 BS LD Spicer
3-4-9251-2 1410 35 1.525 2.500 1.938 3.750 BS LD Spicer
3-4-7151 1410 35 1.525 2.500 1.938 5.750 BS LD Spicer
3-4-5191-1 1410 35 1.525 2.125 2.000 3.688 BS LD Spicer
3-4-6691-1 1480 35 1.525 2.125 2.000 4.031 BS LD Spicer
2-4-8061 1310 36 0.878 1.375 1.000 2.562 SR LD Spicer
3-4-18183-1 1480 36 1.567 2.156 2.000 4.022 BS LD Spicer
4-4-7111-1X 1550 36 2.364 3.000 2.688 5.078 BS LD Spicer
5504-01 1550 37 1.609 2.500 2.000 4.406 BS Dana 80 LD PTI
3-4-8781-1 1480 38 1.998 2.750 2.125 4.156 BS LD Spicer
4-4-4611-1 1550 38 1.998 2.750 1.984 4.156 BS LD Spicer
4-4-4611 1550 38 1.998 2.750 1.984 4.156 UB LD Spicer
4-4-4491-1 1550 38 1.998 2.750 2.125 4.047 BS LD Spicer
4-4-7341-1 1550 38 1.998 2.750 2.125 4.141 BS LD Spicer
4-4-6101-1 1550 38 1.998 2.750 2.125 7.031 BS Flanged end yoke. LD Spicer
4-4-6981-1X 1550 38 1.998 3.000 2.125 4.500 BS LD Spicer
4-4-4611-2 1550 38 1.998 2.750 1.984 4.156 BS Attaching hardware by OEM LD Spicer
3-4-11061-1X 1480 39 2.024 2.625 2.250 4.344 BS LD Spicer
3-4-13061-1X 1480 39 2.024 2.625 2.250 4.344 BS LD Spicer
3-4-13081-1X 1480 39 2.024 3.000 2.281 4.344 BS LD Spicer
4-4-5961-1X 1550 39 2.024 2.625 2.255 4.281 BS LD Spicer
4-4-7571-1X 1550 39 2.024 3.000 2.297 4.281 BS LD Spicer
4-4-5691-1X 1550 39 2.024 2.625 2.255 4.281 BS LD Spicer
4-4-7551-1X 1550 39 2.024 2.625 2.250 4.266 BS LD Spicer
3-4-9821-1 1350 46 1.194 2.000 2.203 3.938 BS LD Spicer
8-4-1151X 1820 46 2.375 2.953 2.375 3.938 WB Includes speedometer gear LD Spicer
8-4-1161X 1820 46 2.375 2.953 2.375 3.938 WB Assy incl. electronic pickup wheel LD Spicer
3-4-14401-1XM 1480 46 2.372 3.000 3.391 5.500 BS Proprietary to Caterpillar LD Spicer
4-4-4451-1X 1550 46 2.372 3.000 3.375 5.500 BS LD Spicer
4-4-7231-1M 1550 46 2.372 3.000 3.734 6.193 BS Proprietary to Caterpillar LD Spicer
4-4-7211-1M 1550 46 2.372 3.020 3.734 6.193 BS Counterbore 0.790", proprietary to Caterpillar LD Spicer
4-4-4761-1 1550 46 2.372 3.125 3.047 5.063 BS Counterbore 0.500" LD Spicer